Henkel Keen K-50 Installation Instructions & Repair Parts List Download Page 2

Henkel, Inc. 

P.O. Box 1322   *   Hammond, Louisiana   *   70404   *   (985) 345-2171 

www.keenovens.com 

 

Model K-50 Portable Oven 

Installation Instructions & Repair Parts List

 

 
 

 

One Year Limited Warranty 

 
 

 

Henkel, Inc. warrants its products against defects in material and workmanship. Henkel, Inc. will either 
repair or replace without charge any properly installed product which fails under normal operating 
conditions within one year from date of installation, provided it is returned to our factory, 
transportation prepaid, and our inspection determined it to be defective under the terms of this 
warranty. The warranty covers only equipment manufactured by Henkel, Inc., and does not extend to 
transportation, installation, or replacement charges at the buyers’ facility; nor does it apply to any other 
equipment of another manufacturer used in conjunctions with Henkel, Inc. equipment. No other 
warranty, expressed or implies exists beyond that included in this statement. 

 
 
 

 
 

Recommended Spare Parts 

 

When it is critical to have continuous operation of this unit; 

we suggest having the following spare parts on hand: 

 

Heating Element 

Power Cord 

Thermostat

 

 

General Information 

The K-50 Keen oven is a portable unit designed for use in the shop or field. This oven will 

protect electrodes from moisture during transfer from a holding oven to the job. It is light and easy to 
carry. The square shape gives this oven greater stability vertically and horizontally. It is made of steel, 
treated, then painted with a chemical-resistant blue paint. All Keen ovens are Mercury free.  

 

Summary of Contents for Keen K-50









Reviews: