HAIC-N Series
16
1.4.13.3 Press
PRESET CHECK
key to confirm, then the scale back to APW or SMPL mode
1.4.14 Preset Check : Weight
It’s available to pre-set the upper limit of weight under normal weighing mode. If the weight
is over the limit, the beeper makes warning sounds, and the quantity window displays
-o.wt-
flashing
1.4.14.1 Upper limit of pre-setting weight, in normal weighing mode whether there is object on
weighing pan or not, enter the upper limit intended
The entered upper limit of pre-setting weight, the “UNIT” and “DECIMAL POINT” should be
exact same with the weight window
If intended to enter the new upper limit weight, follow the steps mentioned above, the old one
will be replaced by the new upper limit weight
To check the entered upper limit weight, press
PRESET CHECK
key with out entering any
numeric numbers, the display will shows the entered upper limit around 3 seconds, then back
to normal weighing mode.
1.4.14.2 To clear the entered upper limit weight in the normal weighing mode whether there is
object on weighing pan or not, enter “0”
0 entered
1.4.14.3 Press
PRESET CHECK
key to confirm, then the scale back to normal weighing mode
Z
S
Upper limit entered
Z
S
Z
S
Upper limit entered
Z
S