HAIC-N Series
15
1.4.13 Preset Check : Quantity
It’s available to pre-set the upper limit of quantity under APW or SMPL mode. If the counts
are over the limit, the beeper makes warning sounds, and the weight window displays
-0.qty-
flashing
1.4.13.1 Upper limit of pre-setting quantity, in the APW or SMPL mode whether there is object on
weighing pan or not, enter the upper limit intended
Upper limit entered
1.4.13.2 Press
PRESET CHECK
key to confirm, then the scale back to APW or SMPL mode
If intended to enter the new upper limit quantity, follow the steps mentioned above, the old one will
be replaced by the new upper limit quantity
To check the entered upper limit quantity, press
PRESET CHECK
key with out entering any
numeric numbers, the display will shows the entered upper limit around 3 seconds, then back
to APW or SMPL mode.
1.4.13.3 To clear the entered upper limit quantity in the APW or SMPL mode whether there is object
on weighing pan or not, enter “0”
0 entered
Z
S
Piece weight of the object
Z
S
Z
S
Previous upper limit entered
Z
S
