4
calculated unit weight is lower than 4/5 of scale division or the quantity of sample is less
than 10 pieces.
13)
“UNIT WEIGHT”
Unit Weight Window --Displays the average unit weight value, or
number of weighing.
14)
“TOTAL COUNT”
Total count window –Displays the calculated number of pieces on the
weighing pan, or accumulated piece count value.
15)
“WEIGHT”
Weight Window--Displays weight of object on weighing pan, or accumulated
weight value.
4-2-2 Keyboard
1)
0 ~9
numeric keys Enter specific values for tare; unit weight and other data entries.
2)
●
key
Decimal point
3)
SMPL
key Short press to enter the sampling mode. Long press to close ACAI
after sampling. And shift Units when setting capacity.
4)
G N/SET
key Shift the displays of Gross weight and Net weight after tare. Long press to
enter parameters setting. And turn on or turn off check weighing when entering HI, LO, OK
setting.
5)
UWS/ITEM
key Find out the unit weight in memory or reset the unit weight again. Input
the indicated unit weight via numeric keys and press it to start counting function.
6)
M+/SAVE
key Accumulate the records of counting or weighing. Save the changing
parameter. Set the capacity and resolution.
7)
M-/HI
key Clear the input figures. Set the value of HI. Enable the blinking figure plus
one when inputting the figures.
8)
ZERO/ESC
key Zero the display (within 2% of max.capacity) or cancel Tare action.
Exit from the setting without saving.
9)
e
/MR
key
Recall and display the total Accumulation data (weight, total count and
number of weightments ) and the first 10 records in details. Circle the choices in the
Summary of Contents for CYD-C8+-15K
Page 22: ...21 ...
