PRIMAAX
®
EX / PRIMAAX
®
for Volvo Vehicles
Component Replacement
42
17730-254
FIGURE 8-21
15.
Tighten the
7
⁄
8
" cross tube retaining bolt head to 525-575 foot pounds torque.
16.
Tighten D-Pin locknuts to 275-325 foot pounds torque and remove the cross tube
support.
17. Carefully clean the application area using a wire brush to remove loose paint and debris.
18. De-grease area with suitable de-greaser such as mineral spirits or brake cleaner. Ensure
the area is dry when done.
19. Install tamper resistant cap over fully tightened end cap bolt.
IRRITANT, SENSITIZER. SIKAFLEX 221 CAUSES EYE IRRITATION. MAY CAUSE SKIN/RESPIRATORY
IRRITATION. MAY CAUSE SKIN AND/OR RESPIRATORY SENSITIZATION AFTER PROLONGED CONTACT.
MAY BE HARMFUL IF SWALLOWED. AVOID DIRECT CONTACT. WEAR PERSONAL PROTECTIVE
EQUIPMENT (CHEMICAL RESISTANT GOGGLES/GLOVES/CLOTHING) TO PREVENT DIRECT CONTACT
WITH SKIN AND EYES. USE ONLY IN WELL VENTILATED AREAS. OPEN DOORS AND WINDOWS DURING
USE. USE A PROPERLY FITTED NIOSH RESPIRATOR IF VENTILATION IS POOR. WASH THOROUGHLY
WITH SOAP AND WATER AFTER USE. REMOVE CONTAMINATED CLOTHING AND LAUNDER BEFORE
REUSE. STRICTLY FOLLOW ALL USAGE, HANDLING AND STORAGE INSTRUCTIONS AS PROVIDED BY
THE MANUFACTURER.
NOTE
Sealant should be at room temperature when applying.
FIGURE 8-22
FIGURE 8-23
