Hendi 230718, User Manual

Page: 5 / 72

Preparations before using for the first time
• Check to make sure the appliance is undamaged.
In case of any damage, contact your supplier im-
mediately and do NOT use the appliance.
• Remove all the packing material.
• Clean the appliance with lukewarm water with
a non foaming detergent and a soft cloth. Rinse
thourougly and dry.
• Place the appliance on a level and steady surface.
• Keep a clear space of 20 cm around the appliance
for ventilation purposses.
• Position the appliance in a way that the plug is
accessible at all times.
Appliance and parts
1) transparant cap
2) lid
3) pusher
4) jar handle
5) jar
6) cutting unit
7) control panel
8) motor unit
NOTE : Grey marked parts are food contact ap-
proved.
1
2 3
4
5
6
7
8
Operation
• Always stand in front of the appliance in such a
way that the control panel can be easily reached.
• Check if the motor unit is switched off and un-
plug it.
• Place the ingredients in the jar.
• Close the lid firmly.
• Place the jar onto the motor unit.
• Plug the appliance into mains.
• Switch on the motor unit.
•
NOTE
: Always start at low speed.
Power-button Pulse-button
Speed dial
5
EN