6
EN
2. INSTALLATION
2.1 INSTRUCTIONS FOR THE USER
Follow the unit installation environmental condi-
tions:
• Installation area should be dry.
• The unit has IPXI protection level.
• Water and heat sources should be placed at safe
distance.
• Adequate ventilation and lighting corresponding
to hygiene and security regulation following the
existing laws. The surface should be fl at and com-
pact for easier cleaning. For best ventilation of the
unit, make sure there are no obstructions.
INFORMATION
The electric network must be provided with an auto-
matic differential switch having characteristics suit-
able to those of the machine, in which the opening
distance between the contacts must be of at least
3 mm. Proper grounding is necessary.
WARNING
Verify that the electrical setup corresponds with the numbers of the technical characteristics (1.3) found and
on the small plate at the back of the machine.
2.2 INSTALLATION PROCEDURE
The machine is supplied in a closed package fi xed
with metal straps on a pallet. The machine must be
unloaded according to instructions shown on the
packaging using proper equipment. Use a fork lift to
transport the unit to the installation area.
After cutting the metal straps, remove the plastic
cover and take the unit out from the packaging, then
put a belt under the machine (fi g. “PICT-3”) and
a fork lift (manual or motor), lift the machine and
slide away the bottom pallet, position the machine
making sure you leave a space around it of 50 cm
to make usage, cleaning and maintenance easier. If
the machine is unstable put hard rubber pad under
the unit’s foot or wheel. If the machine has wheels
make sure they are blocked by pushing the lever A
downwards (fi g. PICT 4).
Attention: All the packaging materials must be disposed of in conformity with the local law in force.
Fig. 4
Fig. 5
