7
EN
Cleaning and maintenance
Attention
: Always unplug from the electrical power supply outlet and let it cool down completely before clean-
ing and storage.
Cleaning
• Never immerse the appliance in water or other
liquids.
• Clean the cooled exterior surface with a slightly
damp cloth or sponge with some mild soap solu-
tion.
• Never use abrasive sponges or detergents, steel
wool or metallic utensils to clean the interior or
exterior parts of the appliance.
Storage
• Before storage, always make sure the appliance
has already been disconnected from the electri-
cal outlet and cooled down completely.
• Store the appliance in a cool, clean and dry place.
• Never put heavy objects on the appliance as it
may damage the appliance.
Troubleshooting
If the appliance does not function properly, please check the below table for the solution. If you are still unable
to solve the problem, please contact the supplier/service provider.
Problems
Possible causes
Possible solutions
The appliance is con-
nected to the power sup-
ply but the heating indi-
cator does not light up.
Power plug is not connected properly
to the electrical power supply outlet.
Check again to make sure it is
connected properly.
Heating indicator defective.
Contact the supplier.
Hi-limiter (thermal cut-out) acti-
vates.
RESET the Hi-limiter [See ==> RE-
SET the Hi-limiter (thermal cut-out)]
The appliance does not
heat up but the heating
indicator light up.
Temperature control knob defective
Contact the supplier.
Heating element defective
Contact the supplier.
Technical specification
Item no.
212172
Operating voltage and frequency
220-240V~ 50/60Hz
Rated input power
1000W
Temperature setting
0°C ~ 220°C (MAX)
Protection class
Class I
Waterproof protection class
IPX3
Dimension
250x380x(H)590 mm
Net weight
approx. 7kg
Remark: Technical specification is subjected to change without prior notification.
