6
STEP 10:
Use a plum line to align hole centre for the top pivot to the bottom pivot plate and screw into place - this should
be 46mm from the door frame.
STEP 11
i) For HF25 kits, please skip to step 13. For HF40 kits, cut guide channel to required length.
ii) Use a plum line to align the guide channel with the track, mark out positioning with a pencil ready for routing
STEP 12:
Route guide channel into floor and secure into position.
17mm
2mm
21mm
20mm
It is the installer's
responsibility to ensure the
guide channel has been
routed into the floor
appropriately.
Guide Channel Formula:
Guide channel length = opening width - 85mm
