2
HENDEN – QUICK START GUIDE
H3 OPERATION
Setup
Before using the Robotic Pool Cleaner for the first time, perform the following steps:
Into the Pool
Attach the floating cable to the power supply.
Position the power supply at least 3m/10ft away from
the edge of the pool.
Operation
Out of the Pool
Place the Robotic Pool
Cleaner into the pool.
Release it and let it sink to
the floor. Make sure that
the floating cable is free
of any obstructions.
Turn the power supply ON.
The Robotic Pool Cleaner will
now operate until it has reached the end of the
cleaning cycle.
Open the filter cover.
Open the latch to release
the bottom lid.
Rinse well with hose. Once
debris is removed close
and place back into your
cleaner.
The basket handle will
automatically pop up,
making it easy for you
to lift the basket out.
Storage
Coil the cable and store in a cool dry space upside down, or store in a caddy. DO NOT store the robot where it
will be exposed to direct sunlight, excessive heat or to frost.
Cleaning the Basket
It is highly recommended to clean the filter basket after each cleaning cycle. Note: Don’t let the ultra-fine filter
cartridges dry out before cleaning.
Unplug the power supply before servicing.
1
2
3m/10ft
1
2
3
4
5
6a
6b
6c
6d
7
CLICK
CLICK
1
2
1
ON
