HENAN SUWEI CreatBot, User Manual, Page: 36 / 40

Specifications
Frequently Asked Questions
not over 120℃, and you can close the bed above 100mm.
3. The model not stick on the platform ?
Please paste masking paper or Kapton on the platform , or the nozzle is too far
away from the platform, or the bottom of the model is not flat.
4 . No or less silk coming on the first layer ?
The distance between nozzle and platform is too small , or the filament has not
been sent to the nozzle .
5. Why nozzle is not spit silk ?
The filament is not pressed or too tight, or print temperature is too low, or the
filament feeder not working.
6 . How to prevent model become warped ?
Increase hot bed temperature or use Kapton, or change platform adhesion
type to Raft, or cover the baffle, or reduce indoor ventilation.
7 . How far from nozzle to platform appropriate ?
Distance should be 0 in theory , but there is no absolute flat platform, so the
distance -0.1mm. Finally, with the actual printing effect as the
standard, too close will lead to a silk blocked, too far will cause the model not
stick on the platform.
8 . How to determine whether the
temperature
is too high ?
PLA temperature is too high will appear liquefaction , ABS will be the carbide ,
that will block the nozzle .
9 . What reasons will causing nozzle blocked ?
Filament are impurities or print environment dust too much, bad of thermal
conductivity between the nozzle and the heating block.
10 . Model surface is loose with crack ?
The layer is too high or the printing speed too fast, nozzle temperature too
low or filament press nut too loose, or filament is wrapped.
11 . How to print a small model ?
Multiple the model , and print them at a time.
12 . Dual color model not aligned ?
Adjust offset of second nozzle in machine settings .
13 . Dual color model color interference ?
Align two nozzle in vertical direction
14 . There is too much silk drag on the model ?
Please enable filament retraction, and specified proper retract speed, and
distance, the retract distance should not less than 4mm, and the speed not
less than 10mm/s.
Printing Troubleshoot
- 37 - - 36 -
Specifications
Model DX DX Plus DE DE Plus
Build volume 300 * 250 * 300 300 * 250 * 520 400 * 300 * 300 400 * 300 * 520
Nozzles
Dual / Tris
Diameter 0.4mm(0 . 3/0.6/0.8/1.0mm can be customized)
Temperature 400 ℃
Nozzles Type print head/new print head
Hot bed 120 ℃ ( can be closed after certain layers )
Min . Layer 0.04mm
Accuracy X 、 Y 、 Z axis 0 . 01mm
Print Speed 120mm / s ( inner / outter , top / bottom , fill , first layer speed can be set separately )
Travel Speed 200mm/s
Materials ABS,PLA,TPU,PETG,HIPS,PVA, PA,PC,Carbon Fibre,etc
Fila . Diameter 3 . 0mm (1 . 75mm optional )
Keypad Yes (nine key)
Auto Turnoff Yes (pwr manager + relay)
Continue Play Yes (Power outage, lower plate and save data)
Fila . Check Yes ( pause printing when filament finish , and lower platform )
Adju . Head Yes ( height-adjustable-nozzles )
OS Windows, Linux, Mac OS, OSX
Languages Chinese , English multi - language
Software CreatWare Muti - language
File Format STL, OBJ, GCode, Amf
Chipset Atmega 2560-16AU (AVR 8 Bit 16MHz ， 256KB Flash)
Display 128*64 monochrome multi - language ( support color TFT )
Pwr Supply 110/220V 360W
110/220V 700W
Dimension 420*380*570 420 * 380 * 790 590 * 430 * 570 590 * 430 * 790
Weight 35 Kg 40Kg 45Kg 55Kg