44
Appendix A: Troubleshooting
No DGPS position in
external RTCM mode
•
Verify the baud rate of the RTCM input port
matches the baud rate of the external source
•
Verify the pin-out between the RTCM source and
the RTCM input port (transmit from the source
must go to receive of the RTCM input port and
grounds must be connected)
•
Ensure corrections are being transmitted to the
correct port—using the $JDIFF,PORTB command on
Port A will cause the receiver to expect the
corrections to be input through Port B
Table A-1: Troubleshooting (
continued)
Symptom
Possible Solution
Summary of Contents for V104s
