- 6 -
8. Use the provided spade covers
to insulate the two blank
terminals on every boom switch.
Fig. 6: Boom Switch Connectors
Insulated
9. Connect the AutoMate interface
cable (A) to the 5-channel driver
(B).
10. Find a suitable mounting location
for the 5-channel driver and
install securely using screws or
tie-straps.
Fig. 7: 5-Channel driver install
11. Locate the joystick wiring
harness at the bottom front area
of the cab console. The end of
this harness will branch into
several packard connections.
Identify the two pin packard
connector which carries the
master spray/hold connection.
This connection will typically
have one blue and one white
wire entering and two yellow
wires exiting.
Fig. 8: Master spray/hold connection
Switch Connectors
