C321 User Guide
Chapter 3 – Setup and Configuration
Page 32 of 49
Type your
APN User name
,
APN Password
,
IP address
,
Port
, and
Mountpoint
. If a username and password is not
required for your APN, you can leave those fields blank. The configuration of NTRIP for a Base is shown below:
If configuring NTRIP for a Rover, click
Get Mountpoint
to generate a list of available mount points.
Some networks require a GNSS position prior to sending RTK. To send GNSS positions to the network, click the
dropdown menu next to “
Upload GGA
” and select a rate.
Note:
The
Auto Connect
identifies that the receiver connects to the network when powered up.
WARNING
:
If the C321 has not yet established an internet connection via the Internal GSM modem, the
Get
Mountpoint
button will not work. You can configure the APN settings while using TCP/IP so that an internet
connection is established.
