11
G E T T I N G S TA R T E D
3.2 Inserting and Removing MicroSD Memory Card
The HEMA NAVIGATOR 5” comes with a pre-installed 4GB MicroSD card.
To remove the MicroSD card from your HEMA Navigator:
1. Turn the Navigator so that the rear of the device is visible.
2. Locate the MicroSD card slot on the side of the device.
3. Using your fingernail, depress the card further into the slot and slowly
release.
4. The card should spring out of the slot far enough for removal.
NOTE: Avoid letting the MicroSD card eject quickly out of the slot.
To re-insert the MicroSD card
1 Turn the Navigator so that the rear of the device is visible.
2 Locate the MicroSD card slot on the side of the device.
3 Position the card with printed side facing you and as per illustration.
4 Slide the card gently into the slot until it clicks into place.
as per illustration.
RESET
4GB
HN5 Quick_start guide layout_Ver1_2:Layout 1 27/02/10 2:26 PM Page 11
