HTMA TOUCH Series
6 Zones Mixer Amplifier with Timer, USB, SD, BT, Tuner
9
4.2. Rear panel
COM
100V
COM
100V
Zone1
COM
100V
Zone2
COM
100V
Zone3
COM
100V
Zone4
COM
100V
Zone5
COM
100V
Zone6
AUX IN
AUX OUT
~220-240V/50-60Hz
Speaker Output
Bluetooth
Antenna
AM/FM Antenna
MIC2 Volume MIC3 Volume
MIC2
MIC3
Turn off the power before inserting
or removing the SD-Card
0
10
0
10
MADE IN CHINA
0762600819090001
1
2 3
4
5
6
8
9
10
11
12
13
14
7
1. FM/AM Antenna
- The supplied antenna has 2 wires: there is no polarity.
Connect here the two wires and close the security lock.
2. AUX Input
- You can connect here any Line-level stereo sources (CD-players,
DAB Radio Tuner, Mixers, Tablets, etc.). All these signals are muted when front
MIC audio exceeds mute threshold.
3. AUX Output
- Connect here any power amplifier, recording device, mixer or
other audio system.
4. SD-Card Slot
- This SD-Card outlet accepts SD-Cards in FAT32 format (max.
32GByte) and plays MP3 and WMA files.
5. 6-Zone Output terminals
- Connect here your 100V speakers.
WARNING: Pay attention to line polarity when connect speakers to
the unit. Each output has positive terminal (100V), and negative ter-
minal (COM).
6. AC Power Connector
- Connect power cord to a mains outlet, paying atten
-
tion that voltage is 220-240Vac/50-60Hz.
7. Fan Slot
- This window assures good heat dissipation to your HTMA TOUCH
Series amplifier.
Please be careful to not cover this slot, otherwise the equipment
could be damaged.
8. Fuse Holder
- Unscrew to change internal fuse. In order to prevent the risk
of fire and damaging the unit, please use only of the recommended fuse type
as described in Specifications. Before replacing the fuse, make sure the unit
turned off and disconnected from the AC outlet.