background image

                                                                                                                                                                                                       

6

                   

 

                                              Picture 3                                        Picture4 
6. Place the front panel in the slot of floor panel, then lock the two inside latches between front 

and right side panel and between front and left side panel. 

   

 

 

7. Place the top panel on the five side panels. Make sure the connection wires of three side 

panels (left back, right back & front) protrudes through the corresponding holes of the top    
panel.  

  Make sure the top panel’s arched side is facing to the front. 

  Make sure the wire is through each hole smoothly and completely. 

  Make sure the trim of the top panel fits completely around the five side panels. 

   

   

 

8. Make sure each of the lead wires on the top of the left back, right back and front panels is   

protruding through the top panel; then plug each of the three lead wires into the three 
connectors of the top panel. 

Summary of Contents for HSI 70 CE















Reviews: