Helo 1712-450-171809, Product Manual

Page: 33 / 109

2.9.1 Sauna heater safety clearances
Image 3 Safety clearances
Table 1 Safety clearances
2.10 Connection of the sauna heater to the mains
The sauna heater must be connected to the mains by a qualified electrician and in compliance with current
regulations. Sauna heater is connected with a semi-permanent connection. Use H07RN-F (60245 IEC 66)
cables or a corresponding type. Other output cables (signal lamp, electric heating toggle) must also adhere to
these recommendations. Do not use PVC insulated cable as a connection cable for the sauna heater.
A multipolar (e.g. 7-pole) cable is allowed, if the voltage is the same. In the absence of a separate control
current fuse, the diameter of all cables must be the same, i.e. in accordance with the front fuse.
The connecting box on the sauna wall should be located within the minimum safety clearance specified for the
sauna heater. The maximum height for the connection box is 500 mm from the floor
Image 4 page 9 If the connection box is located at 500 mm distance from the heater, the maximum height is
1000 mm from the floor
Sauna heater insulation resistance: The sauna heater heating elements may absorb moisture from air, e.g.
during storage. This may cause bleeder currents. The moisture will be gone after a few heating sessions. Do
not connect the heater power supply through a ground fault interrupter.
Adhere to the effective electrical safety regulation when installing the sauna heater.
Effect Saunaroom Minimum distance to
Mounting dimensions
minimi
Stone
kW
Volume
m
3
Height
Minimum
mm
Side wall
A
mm
In front of
D
mm
Ceiling
F
mm
Floor
K
mm
B
mm
J
mm Circa.
kg
4,5
6,0
8,0 4
– 6
5
– 9
8
– 12
1900
1900
1900 50
50
50 50
50
50 1150
1150
1150 100
100
100 125
125
125 390
390
390 20
20
20
Product Manual Fonda STJ
8
K
650
Grill Ø 3,5
Screw 6 x 40 (2pcs)
A 450 A 340 D
min 20
min 30
min 20
min 30
300
min
B
m
in
J
1
5
0
7
5
0
F
m
in
1
9
0
0
Screw 6 x 16 (2pcs)