Quick Start Guide REX 200/250 3G | LTE
10
4.3.2 Step 2 “Internet” – Network settings
In step 2, the network configuration for the LAN and WAN side of the device is
defined.
-
LAN
Each REX 200/250 comes with the LAN-side IP address
192.168.0.100/24 as a default. Modify the IP address and the subnet
mask in keeping with the specifications from the machinery network
to be maintained remotely.
-
WAN
The responsible network administrator provides you with the informa-
tion necessary for the setting DHCP or static IP. DHCP is preset upon
delivery.
-
Modem
The parameters for the APN access point (Access Point Name) of the
card provider and the correct SIM PIN must be available to you and be
stored here. Most providers are already available for selection (sorted
by country). In the event that the correct provider is not present, the
APN data can also be entered manually.
Note:
If you enable DHCP, make sure that the DHCP server does not assign the
IP address to a WAN port that is already active on the LAN side. IP addresses from
two different subnets must be assigned to every router’s LAN and WAN ports.
4.3.3 Step 3 “Configuration” – Coupling/pairing of the router
with the portal
The fundamental parameters of the minimal configuration of the REX 200/250 are
now filed in the Account portal and must now be transferred to the device
(See chapter 5).
Note:
We recommend the “Download configuration to the PC” variant for the initial
configuration.
