Quick Start Guide NETL ink® Ethernet Gateways
6
All NETL ink® devices are supplied with the IP address 192.168.4.49. This means that
you will have to use the same address range for your computer. Please note that this
applies not only to the IP address, but to the subnet mask as well.
The IP address to be set here must fall within the “192.168.4.x” address range, the
subnet mask should be identical to that of the NETL ink® (255.255.0.0).
No entries need to be made with the default gateway and preferred DNS server.
Once the settings are applied, the “LAN connection” should be recognized.
4. IP Address Settings on the PG/PC Network Card
Note:
It is possible that for the following steps you may require admin rights to your PG/PC.
Start by opening the properties for your LAN connection.
For Windows¹ 7 and above you can access them as follows:
Start -> Control Panel -> Network and Sharing Center -> Change adapter settings
Open the Properties dialog box for the network connection that you want to use in
order to establish the LAN connection to the NETL ink®. To change your computer‘s
IP address, select „Internet Protocol (TCP/IP)“ and click on the „Properties“ button.
