Quick Start Guide REX 100 WAN|WiFi
2
Contents
1. Introduction
3
2. Preparing the REX 100 unit
3
3. Access to the myREX24 V2 portal
4
4. Initial router configuration via the myREX24 V2 portal
6
5. Router configuration transfer options
8
6. Establishing a VPN connection to your REX 100
17
7. Tips and tricks
18
8. Remote maintenance of Ethernet CPUs
20
9. Description of LEDs and buttons
21
10. Restoring the REX 100 router to its default settings
21
11. Load configuration/firmware update from USB stick
22
12. Technical data
23
Notes:
The contents of this Quick Start Guide have been checked by us so as to ensure that they match the hardware and software described. However, we assume no liability for any existing
differences, as these cannot be fully ruled out. The information in this Quick Start Guide is, however, updated on a regular basis.
When using your purchased products, please make sure to use the latest version of this Quick Start Guide, which can be viewed and downloaded on the Internet at www.helmholz.de.
Our products contain, among others, open source software. This software is subject to the applicable licensing conditions. We will send you the appropriate licensing conditions,
including a copy of the complete licensing text, together with the product. These are also available in our download area of the respective product under www.helmholz.de. We also
offer to send you or any third party the complete source code of the applicable open source software as a DVD upon request for a contribution towards costs of 10.00 Euro. This offer
is valid for a period of three years as of the delivery of the product.
Our customers are important to us. We are pleased to receive suggestions for improvement and new impulses. If you have any questions about the use of the product, please contact
Helmholz Support by phone or send an e-mail to [email protected].
1) SIMATIC and STEP 7 are registered trademarks of Siemens AG.
2) Windows is a registered trademark of the Microsoft Corporation.
