14
LOAD/UNLOAD THE FILAMENT
USING THE LCD (EXTRUDER 0 ONLY)
You can follow these steps to load/unload through the LCD, but this only works for the extruder 0:
1. In the LCD push the button to have access to the "info screen";
2. In "info screen" select "Prepare";
3. In "Prepare" go to "Preheat PLA" or "Preheat ABS";
4. In "Preheat PLA" select "Preheat PLA 1", the printing table and the extruder 0 will start heating;
5. After finishing heating, push the button to go to the "info screen" and select "Prepare";
6. In "Prepare" go to "Move axis" and select "Move 1mm";
7. In "Move 1mm" select "extruder";
8. In this screen you rotate the button to the right if you want to load and to the left if you want to unload.
