.
Tel: +44 (0) 1604 706633
www.htdata.co.uk
INS
T-MTP
-R10
Stay in touch with us!
Stay in touch with us!
Single mode
UPC/APC
Single mode
UPC
OM3 only
Any Multimode
Fibre type
green
Yellow
Aqua
Beige
Colour
7.1
4. The installation of the RapidNet MTP links is complete.
Other actions to undertake are to label the ports on the front, there are
two labelling fields for each cassette one above and one below the
cassette. Alpha Label is a free software available from the download
section of the HellermannTyton website (www.htdata.co.uk) this contains
the correct template for the windows.
The panel is supplied blank white
labels which can be used instead of printed labels and magnifying
windows which should be snapped into place when the label has been
fitted
.
5. Testing of the links.
This should be undertaken in the normal way for a permanent link taking
into account the correct number of mated pairs/ connectors and the
cable test equipments procedures.
6. Removing the MTP connector.
To remove the MTP connector pull back on the coloured collar around
the connector, marked with ‘Pull’; this releases the connector from the
adaptor.
As soon as they are separated it is recommended that clean
dust caps are replaced on both ends to prevent the ingress of dust and
loss of performance.
7. Note.
The installation and removal of the MTP connector is the same regardless
of the fibre type.
Connectors are supplied in 4 standard colours as detailed below.
6.1. removing the MTP connector
Step 6: Remove MTP Connector
Step 7: Note
To remove the MTP connector pull back on the coloured collar around the connector, marked with ‘Pull’; this releases the connector from the
adaptor. As soon as they are separated it is recommended that clean dust caps are replaced on both ends to prevent the ingress of dust and loss of
performance.
The installation and removal of the MTP connector is the same regardless of the fibre type.
Connectors are supplied in 4 standard colours as detailed below.
7.1
Single mode
UPC/APC
Single mode
UPC
OM3 only
Any Multimode
Fibre type
green
Yellow
Aqua
Beige
Colour
7.1
4. The installation of the RapidNet MTP links is complete.
Other actions to undertake are to label the ports on the front, there are
two labelling fields for each cassette one above and one below the
cassette. Alpha Label is a free software available from the download
section of the HellermannTyton website (www.htdata.co.uk) this contains
the correct template for the windows.
The panel is supplied blank white
labels which can be used instead of printed labels and magnifying
windows which should be snapped into place when the label has been
fitted
.
5. Testing of the links.
This should be undertaken in the normal way for a permanent link taking
into account the correct number of mated pairs/ connectors and the
cable test equipments procedures.
6. Removing the MTP connector.
To remove the MTP connector pull back on the coloured collar around
the connector, marked with ‘Pull’; this releases the connector from the
adaptor.
As soon as they are separated it is recommended that clean
dust caps are replaced on both ends to prevent the ingress of dust and
loss of performance.
7. Note.
The installation and removal of the MTP connector is the same regardless
of the fibre type.
Connectors are supplied in 4 standard colours as detailed below.
6.1. removing the MTP connector
Single mode
UPC/APC
Single mode
UPC
OM3 only
Any Multimode
Fibre type
green
Yellow
Aqua
Beige
Colour
7.1
4. The installation of the RapidNet MTP links is complete.
Other actions to undertake are to label the ports on the front, there are
two labelling fields for each cassette one above and one below the
cassette. Alpha Label is a free software available from the download
section of the HellermannTyton website (www.htdata.co.uk) this contains
the correct template for the windows.
The panel is supplied blank white
labels which can be used instead of printed labels and magnifying
windows which should be snapped into place when the label has been
fitted
.
5. Testing of the links.
This should be undertaken in the normal way for a permanent link taking
into account the correct number of mated pairs/ connectors and the
cable test equipments procedures.
6. Removing the MTP connector.
To remove the MTP connector pull back on the coloured collar around
the connector, marked with ‘Pull’; this releases the connector from the
adaptor.
As soon as they are separated it is recommended that clean
dust caps are replaced on both ends to prevent the ingress of dust and
loss of performance.
7. Note.
The installation and removal of the MTP connector is the same regardless
of the fibre type.
Connectors are supplied in 4 standard colours as detailed below.
6.1. removing the MTP connector
Single mode
UPC/APC
Single mode
UPC
OM3 only
Any Multimode
Fibre type
green
Yellow
Aqua
Beige
Colour
7.1
4. The installation of the RapidNet MTP links is complete.
Other actions to undertake are to label the ports on the front, there are
two labelling fields for each cassette one above and one below the
cassette. Alpha Label is a free software available from the download
section of the HellermannTyton website (www.htdata.co.uk) this contains
the correct template for the windows.
The panel is supplied blank white
labels which can be used instead of printed labels and magnifying
windows which should be snapped into place when the label has been
fitted
.
5. Testing of the links.
This should be undertaken in the normal way for a permanent link taking
into account the correct number of mated pairs/ connectors and the
cable test equipments procedures.
6. Removing the MTP connector.
To remove the MTP connector pull back on the coloured collar around
the connector, marked with ‘Pull’; this releases the connector from the
adaptor.
As soon as they are separated it is recommended that clean
dust caps are replaced on both ends to prevent the ingress of dust and
loss of performance.
7. Note.
The installation and removal of the MTP connector is the same regardless
of the fibre type.
Connectors are supplied in 4 standard colours as detailed below.
6.1. removing the MTP connector
Single mode
UPC/APC
Single mode
UPC
OM3 only
Any Multimode
Fibre type
green
Yellow
Aqua
Beige
Colour
7.1
4. The installation of the RapidNet MTP links is complete.
Other actions to undertake are to label the ports on the front, there are
two labelling fields for each cassette one above and one below the
cassette. Alpha Label is a free software available from the download
section of the HellermannTyton website (www.htdata.co.uk) this contains
the correct template for the windows.
The panel is supplied blank white
labels which can be used instead of printed labels and magnifying
windows which should be snapped into place when the label has been
fitted
.
5. Testing of the links.
This should be undertaken in the normal way for a permanent link taking
into account the correct number of mated pairs/ connectors and the
cable test equipments procedures.
6. Removing the MTP connector.
To remove the MTP connector pull back on the coloured collar around
the connector, marked with ‘Pull’; this releases the connector from the
adaptor.
As soon as they are separated it is recommended that clean
dust caps are replaced on both ends to prevent the ingress of dust and
loss of performance.
7. Note.
The installation and removal of the MTP connector is the same regardless
of the fibre type.
Connectors are supplied in 4 standard colours as detailed below.
6.1. removing the MTP connector
Colour
Beige
Aqua
Yellow
Green
Fibre type
Any Multimode
OM3 only
Single mode UPC
Single mode UPC/APC
