Johannesburg
(011) 879-6620
Durban
(031) 569-9900
Cape Town
(021) 594-7100
Port Elizabeth
(041) 408-2400
Note
1.
In terms of South African legislation, the user or lesser is responsible for the safety of the electrical installation.
Note
2.
This report covers only that part of the installation described in section 3.
Note
3
.
This report covers the circuits for fixed appliances, but does not cover the actual appliances, for example stoves, geysers,
air conditioning and refrigeration plant and lights.
Note
4
.
Medical and hazardous locations require additional test reports (See 8.8.2 and 8.8.3).
Note
5
.
Enter the required information or tick the appropriate block.
SECTION 1 - LOCATION
(only required if not provided on Certificate of Compliance)
Physical address: ......................................................................................................................................................................................................
Name of building: ...................................................................................................................................................................................................
SECTION 2 - INSTALLATION
Existing Certificate No Yes Date Issued:. ................................................. Number: ....................................................
Existing installation Alteration / Extension New installation Temporary installation
Type of installation: Residential Commercial Industrial Common area for multiple users (Sectional title)
Other Describe: ..............................................................................................................................
Type of electricity supply system: TN-S TN-C-S TN-C TT IT
Supply earth terminal provided: Yes No
Characteristics of supply:
Voltage: 230 V 400 V 525 V Other: .......................................................... V
Number of Phases: One Two Three Phase rotation: Clockwise Anticlockwise
Frequency: 50Hz Other: ........................................................................ d.c.
Prospective short-circuit current at point of control (PSCC):
kA How determined? Calculated Measured From supplier
Main switch type: Switch disconnector (on-load isolator) Fuse switch Circuit-breaker Earth leakage circuit-breaker
Earth leakage switch disconnector
Number of poles: Current rating: A Short-circuit / withstand rating: kA
Rated earth leakage tripping current / n: 30mA Other: ......................................................... mA
Surge protection (see 6.7.6 and Annex. L): Yes No
Is alternative power supply installed (see 7.12)?: Yes No
Is any part of the installation a specialised electrical installation?: Yes No
If yes, complete additional test reports (see 8.8.2 or 8.8.3)
Is any part of the installation at a voltage above 1 kV?: Yes No
If yes, competent person to approve design and complete additional
test reports (see 8.6.3 and SANS 10142-2).
Is this installation one of five or more on the same new supply?: Yes No
If yes, name of the competent person who supervised the installation (see 8.2.3).
9
ADDENDUM B
TEST REPORT
for ELECTRICAL INSTALLATIONS
to SANS 10142-1
Certificate of Compliance (CoC) No.:
Date of Issue:
THE ELECTRICAL CONTRACTORS’ Association (S.A)
ELECTRICAL CONTRACTORS’ ASSOCIATION (SA)
ECA
FOR USE BY ECA MEMBERS ONLY
91 NEWTON ROAD, MEADOWDALE EXT. 2, GERMISTON, 1401 • P.O. BOX 9683 EDENGLEN 1613
EMAIL: [email protected] • TEL: (011) 392 000 • FAX: 086 589 0989
Summary of Contents for ACADEMY T419
Page 1: ......
