Product description
1
2
3
4
5
Nosepiece
Blade
Nosepiece Screw
Trigger
Contoured Ergonomically Engineered Handle
6
7
8
9
Thumb Lever
Tension Lock Screw
Easy-to-read Tension Setting 0-8
Tension Knob
Setting recommendation
Tension adjustment
A1
A2
A3
Slide the thumb lever forward.
While holding the thumb lever forward, rotate the tension knob to the desired tension setting.
Release the thumb lever to lock the tension setting.
Tension cut off forces
Setting
0
1
2
3
4
5
6
7
8
Tension cut off force
20
38
51
68
85
104
125
143
165
The above figures are based on our knowledge and experience from practice and testing with a
commercially available force meter. Therefore these values are not legally binding but only for general
guidance. Because of the large number of possible influences during processing and use, it is advisable
to check the tension cut off forces with a usual tension gauge (frequency of data sampling should be
min. 10 kHz).
Recommended tension force
The following formula should be used for guidance as to the recommended tensile force of the tool:
Min. tensile strength
2
= rec. tensile force
Spare Parts +
Accessories
Bladekit (Blade + Screw)
Calibration tool (CALTOOL)
110-70106
110-70089
EVO7 / EVO7SP
GB
10
