background image

CAUTION: To avoid of electric shock, you must always switch off and unplug the fan before cleaning.   

CAUTION:  
 

 

Select a suitable location for the fan. Always choose a safe location in accordance to the 
safely recommendations outlined. 

 

When placing a fan on a table or shelf, always ensure that the power cord does not hang 
where it can accidentally be pulled /pushed or accidentally fall.  

 

Do not hang or mount the fan on a wall of ceiling.  

NOTE: Before inserting the plug into a power outlet, make sure that the correct voltage being used 
corresponds to what is indicated on the rating label, and that the socket has an earth facility. 

 

OPERATING INSTRUCTIONS 

 

1.

 

Turn the speed control knob for the required fan speed. ‘0’ for ‘OFF’, ‘1’ for Low Speed, ‘2’ for 
Intermediate Speed and ‘3’ for High Speed. 

2.

 

To make the fan head oscillate, push the Oscillating Knob DOWN. To stop the oscillation, pull the 
Oscillating Knob UP. 

3.

 

Adjust the tilt of the fan head to the desired angle by pushing gently up or down on the fan guard. 

 
CAUTION: The fan should always be switched off when making any adjustments to the fan head angle. 

 

CARE & CLEANING 

 
 

 

 

Your appliance must be switched OFF via the main power supply and unplugged, and allow it to 
cool down before proceeding with any cleaning, assembling or disassembling.  

 

Clean the housing with a damp cloth, a vacuum cleaner or a dusting brush. 

 

We recommended lightly running a vacuum cleaner brush nozzle over the fan grille to remove 
any dust or dirt that may have accumulated. 

 

Never use flammable or abrasive cleaning agents such as benzene or spirits to clean the 
appliance. 

 

Never immerse the appliance in water. 

 
 

 

RECYCLING 

 
For further information, please contact your local or regional authorities. 
Electronic  products  not  included  in  the  selective  sorting  process  are 
potentially  dangerous  for  the  environment  and  human  heath  due  to  the 
presence of hazardous substances. 
 
 
 
 
 

NOTE: If the power cord set of this appliance becomes damaged, discontinue use. Repairs should be 
undertaken only by a qualified technician.   

Summary of Contents for MDF40







Reviews: