This switch has five settings which are explained below:
OFF: This position turns off all the heating elements and the power light, the heater stop working.
: This position only turns on the first upper heating element, and the power light.
: This position turns on the first and second upper heating elements.
: This position turns on the first, second and third upper heating elements.
:
This position turns on all the heating elements.
THE ADJUSTTABLE THERMOSTAT SETTING
When power selection switch is in position “
” or “
”, the adjustable thermostat could be adjustable.
When the room temperature reaches set value, lower 1 or 2 heating elements will cut-off automatically
and upper 2 heating elements will remain working, in order to keep the room temperature. When the
room temperature is lower than set value, lower 1 or lower 2 heating element will start to work
automatically.
When power selection is in mode “
” or “
”, the adjustable thermostat could not be adjustable.
Upper 1 or 2 heating elements are always in working mode.
TIP-OVER PROTECTION
This heater is equipped with a tip-over protection switch that is activated when the heater is tipped from
its vertical position and automatically shuts off the heater. The heater will restart when it is returned to its
normal operating position.
Note:
It is normal when the heaters are turned on for the first time or when they are turned on after
having not been used for a long period of time to emit some smell and fumes. This will disappear when
the heater has been on for a short while.
NOTE: Do not place the heater on LONG PILE CARPET OR FLOKATI RUGS. Use a heat board if
necessary.
NOTE: The upper first or upper two heating elements will remain on until the power selection
switch is turned to the “OFF” position.
