HELLER HWR2400 User Manual Download Page 3

 

WARNING: In order to avoid overheating, do not cover the heater, or operate in close 

proximity to curtains, etc. Check air inlets and outlets from time to time for accumulated 

dust.

 

 

Do not leave the heater running unattended.   

 

Do not operate the product if it is dropped, damaged or showing signs of product malfunction. 

 

Do not operate the product with a damaged plug or cord. Return the complete product to the 

place of purchase for inspection, refund or replacement. 

 

If the supply cord is damaged, the cord must be replaced by the manufacturer, its service agent 

or similarly qualified persons in order to avoid hazard.   

 

Do not immerse or expose the product or flexible cord to rain, moisture or any other liquid. 

 

Switch off and unplug from outlet when the product is not in use and before cleaning the unit. 

 

To avoid personal injuries or property damage, do not insert any body parts (e.g. finder) or 

objects through the air inlet or outlet openings when the heater is operating. 

 

This product is intended for normal domestic/household use only. 

 

Always disconnect the heater when moving it from one location to another. 

 

The use of attachments or accessories not recommended or sold by the product distributor may 

cause personal or property hazards or injuries. 

 

The surfaces of the heater are very hot during operation. Avoid contact with the wind outlet. Use 

handles and knobs if necessary. 

 

Do not twist or wrap the power cord around the appliance as this may cause the insulation to 

weaken and split, particularly where it enters the unit. Fully unwind the cord before use as a 

coiled cord may overheat. 

 

Use of an extension cord is not recommended. However, if it is absolutely necessary ensure the 

cord is short as possible (long cords coiled up can overheat and cause tripping accidents). 

 

Do not use the appliance on the same socket or electric circuit with other electrical appliances so 

as to prevent the circuit from being overloaded, which will cause fire. Please do not prolong the 

power cords by yourself or use movable socket. 

 

Ensure the cord is fully extended before use and accommodate it so that it is not in touch with 

any part of the heater. 

 

Do not use the heater in areas such as garages where petrol or other flammable substances are 

used or stored. Do not use the heater when flammable sprays, solvents and glues are in use. 

 

Keep combustible materials such as furniture, pillows, bedding, clothes and curtains at least 

50cm from sides of heater. 

 

Ensure heater is not blocked and there are spacing of at least 50cm around its sides and 120cm 

from the front or heat outlet. 

 

Avoid touching the heater body whilst the heater is on. Do not move the appliance while it is 

functioning in order to avoid overheating with the additional risk of fire. 

 

Switch off and unplug from outlet when not in use, before assembling or disassembling parts and 

before cleaning. Remove by grasping the plug - do not pull on the cord. 

 

Do not use the appliance for other than its intended use. 

 

Do not leave the appliance unattended when switched on. 

 

Do not leave your home while the appliance is in function: ensure that the switch is in OFF (0) 

position and the thermostat is in minimum position. Always unplug the appliance. 

Summary of Contents for HWR2400









Reviews: