To avoid personal injuries or property damage, do not insert any body parts (e.g. finder) or
objects through the air inlet or outlet openings when the heater is operating.
Always disconnect the heater when moving it from one location to another.
The use of attachments or accessories not recommended or sold by the product distributor may
cause personal or property hazards or injuries.
The surfaces of the heater are very hot during operation. Avoid contact with the wind outlet. Use
handles and knobs if necessary.
Do not twist or wrap the power cord around the appliance as this may cause the insulation to
weaken and split, particularly where it enters the unit.
Use of an extension cord is not recommended. However, if it is absolutely necessary ensure the
cord is short as possible (long cords coiled up can overheat and cause tripping accidents).
Do not use the appliance on the same socket or electric circuit with other electrical appliances so
as to prevent the circuit from being overloaded, which will cause fire. Please do not prolong the
power cords by yourself or use movable socket.
Ensure the cord is fully extended before use and accommodate it so that it is not in touch with
any part of the heater.
Ensure heater is not blocked and there are spacing of at least 50cm around its sides and 120cm
from the front or heat outlet.
Avoid touching the heater body whilst the heater is on. Do not move the appliance while it is
functioning in order to avoid overheating with the additional risk of fire.
Switch off and unplug from outlet when not in use, before assembling or disassembling parts and
before cleaning. Remove by grasping the plug - do not pull on the cord.
Do not use the appliance for other than its intended use.
Do not leave the appliance unattended when switched on..
Do not use the heater to dry your laundry. Never obstruct the intake and outlet grilles (danger of
overheating).
When the appliance is used in portable version, do not place it up against the walls, furniture,
curtains, etc.
This appliance comes with a Y-type connection. Replacement of the feed cable must be
entrusted with a technician only, because such work required special tools.
The appliance must not be positioned directly underneath a fixed power point.
Do not use the appliance while it is cooling down, in order to avoid overheating with the attendant
risk of fire.
Do not use this heater with a programmer, timer or any other device that switches the heater on
automatically since a fire risk exists if the heater is covered or positioned incorrectly.
This electrical appliance complies with relevant technical safety and electromagnetic
compatibility standards.
For cleaning do not immerse the heater in any liquid. For wiping the heater clean, use only a
moist cloth. For cleaning never remove the grid. You can use long and thin brush that can be
easily put inside of grid. Ensure that the heater is turned off, unplugged and cooled down before
and cleaning.
This appliance is designed for use in gardens or terrace and any rooms in your house.
Do not put the heater in an extreme weather (like storm, rain, snow or thunderstorm). Never let it
stand in strong draught because it may tip over.
