22
Insert the filter / Front panel assembly
1
Please make sure the correct squence when inserting the new filters.
2
Insert the new combination filter (Active-
carbon-filter/cold-catalyst-filter) with the
top part und push the combination filter
slightly to place it correctly.
3
Insert the new combination filter
(Prefilter / HEPA-filter) into the provided
catch of the main frame (1).
Then gently push the filter inwards to
place it (see picture).
4
Position the front panel cover on the
installed fixing elements of the main
frame. Press the front cover slightly
inwards so that the cover snaps into
place (see picture).
Make sure the front cover is tightly
closed.
Cleaning / Maintenance
•
Before each cleaning or maintenance switch-off the device and unplug the device from the
socket outlet. Never clean or perform maintenance when it is plugged in!
•
Clean the device regularly.
•
Take a soft dry cloth if you want to make the device free from dust and fluff.
•
Do not immerse the device, cables or parts of the device in water or other liquids.
•
Do not allow any water or other liquid to enter the motor housing or the electrical parts of this
device. Danger to life!
•
Keep the ventilation slots on the back of the motor housing free of dust and fluff.
•
Do not use detergents, abrasive cleaning powder or polish of any part of the device, as these can
damage the surface finish.
•
If you do not use the device any time you should safe the appliance for exceeding dust and dirt.