18
Humans spend a large proportion of their time indoors. The air indoors is often polluted with various
types of air pollution. The air purifier cleans the room air with the help of a multiple filter system and
an additional integrated ionizer.
The fan of the air purifier sucks in the polluted air and the combination filter consisting of
prefilter/HEPA-filter out larger particles such as dust, dirt, hairs and HEPA-filter filter out mites, pollen,
bacteria or viruses.
Formaldehyde, benzene and other unpleasant odors are filtered out of the room air with the aid of the
combined filter Active Carbon / Cold Catalysis Filter.
Ionizer:
The ionizer charges the air negatively and thereby forms finest particles by means of electrical
charging. This results in a greater concentration and formation of larger particles, which then land on
the floor, where they can be vacuumed up.
The air purifier has following features:
-
Auto-Mode Function (Natural, Silent, Efficient, Auto)
-
Intelligent Air quality sensor
-
Silent modus
-
Timer function (1H, 4H, 8H oder 24H)
-
Activatable Ionizer
-
Multiples Filter system
-
Infrared Remote control
-
The air purifier is suitable for room sizes from approx. 15 - 20m²
Op
erating instructions
-
Read the operating instructions carefully before using for the first time.
-
Make sure the unit is standing on a flat, firm, stable and dry surface. Only operate the device in a
safe, upright and stable position and do not use a soft surface
.
-
Keep a safe distance from the device to walls and all other objects of at least 30 cm.
Make sure that the air inlet and outlet openings are not blocked. The device must always be able
to ventilate freely on all sides.
- Remove all packaging and clean the device with a clean and dry cloth.
-
Observe the mentioned safety information’s.
Initial use
- Open the cardboard box and take the device upwards.
- Remove all packaging materials, foils etc. from the device
.
- Before first operation, you must first remove the filters, which are inside in device. Remove
all packaging materials, foil etc. from the filter and insert them – refer to section „Filter-
replacement“
Attention:
Before using for the first time, remove all packaging materials from the
filters and install them as explained in the section "Filter replacement".
- Plug the mains plug into the socket, a short beep sounds and the device is ready for use.
On / Off switching
Button „On/Off“
- Press the button „ On/Off “ .
The unit automatically switches to fan mode "Auto" and the ionizer is
on. You can choose to turn the ionizer off or on.
- With the „Mode“ button you can select any function.