MAINTENANCE AND CLEANING
ATTENTION:
Careful and regular maintenance of this infrared heater is required to attain a long and
efficient operation of your appliance.
1. Check the cleanliness of the reflector and IR-filament at least once a month. If necessary, apply
cleaning and maintenance instructions.
2. The number of checks may be increased depending on the amount of the dust in the
environment in which the heater is kept.
3. Check the deformation of the reflector, wire and frame visually while cleaning the appliance. In
the case of any deformation, consult a qualified technician.
4. Check the power cable and plug visually while cleaning the appliance. In the case of any
deformation, consult a qualified technician.
5. It is recommended to change the reflector every 2 years for more efficient operation.
ATTENTION:
Regular and careful cleaning helps your heater operate more efficiently and ensures a
longer life span.
1. Unplug the power cable for your safety before cleaning your appliance.
2. Remove the front grid wire through the inlets on the frame using a slotted screwdriver.
3. Make sure that the power is off for your safety. Power cable plug must be unplugged.
4. The reflector and filament must be cleaned with a soft cloth, a smooth brush or cool or dry air.
The cloth may be damp but never too wet and the cleaner should not contain any chemicals.
5. Refrain from using cleaning material likely to damage the reflector (cleanser etc.).
6. Insert the wire grid using a slotted screwdriver.
Specifications
Model
：
HIH20
Voltage
AC220-240V
Frequency
50-60Hz
Electric power(W)
2000W
CUSTOMER SERVICE
Australian Customer Service
GAF Control (Sales) Pty Ltd
P.O Box 19
Altona North, Victoria, 3025
Phone: 1300 659 489
Hours: 9am-5pm (EST) Mon-Fri
www.gafcontrol.com.au
*This product may vary slightly to the product illustrated due to ongoing product development.
