CAUTION:
To avoid of electric shock, you must always switch off and unplug the appliance before
cleaning.
Do not use harsh detergents, chemical cleaners or solvents as they may damage the surface
finish of the plastic components and the paint finish.
CARE & CLEANING
Your appliance must be switched OFF via the main power supply and unplugged, and allow it to
cool down before proceeding with any cleaning, assembling or disassembling.
After each use, clean and dry the appliance. Use a damp cloth to clean the exterior and glass
door. Note: DO NOT IMMERSE THE OVEN IN WATER.
All accessories should be washed in warm soapy water. (Note: MUST WASH ACCESSORIES BY
HAND; DO NOT PLACE IN DISHWASHER). Make sure all accessories and the appliance are dry
before storing.
Reassemble the unit first before storing. Store it in a cool, dry place.
Cleaning the Glass Door
The glass door may be removed for cleaning as needed. To do this, open the door; hold the door by
the handle with one hand. Slide the lock on the bottom RIGHT corner of the Door to the LEFT with
the other hand. Lift the door out from the oven chamber.
Cleaning the Dual Heat Shields
The heat shields may be removed for cleaning as
needed. To do this, grasp the top of the heat shield
with fingertips, using the finger holds. Tilt the shield
toward the center of the Oven chamber and lift
straight up and out (Refer to fig 5).
Cleaning the Crumb & Drip Tray
The crumb & drip tray may be removed for cleaning
as needed. To do this, grasp the handle of the tray
and pull out until it clears the bottom of the oven
chamber. Clean as directed and replace.
NOTE: If the power cord set of this appliance becomes damaged, discontinue use. Repairs should be
undertaken only by a qualified technician.
NOTE: DO NOT USE STEEL WOOL SCOURING PADS, ABRASIVE CLEANERS, OR SCRAPE THE
WALLS WITH METAL UNTENSILS, AS ALL OF THESE METHODS MAY DAMAGE THE
CONTINUOUS CLEAN COATING.