Hella 2RL 008 965-001, Mounting Instructions

Page: 15 / 29

Emergency flashing beacon, type M
The bearing surface must be free from dirt, water, ice and
snow.
The electric connection can be performed through the
open window on the vehicle electric socket. Care must be
taken in this instance, to avoid the connection cable being
pinched or bent at sharp angles! When not in use, the
flashing emergency beacon is to be kept in the vehicle so
as to prevent the driver or passenger from being hindered
while driving the vehicle.
Warning!
Maximum admissible speed 120 km/h.
Rotating-beacon, type FL
Attach the Hella attachment tube (Hella part no. 8HG 002
365-001 or 8HG 006 294-…) with built-in socket securely
on the vehicle perpendicular to the road surface. Remove
rubber cap, stick rotating beacon onto the attachment
tube and screw tight.
Important: max. tightening torque of the hexagon
socket 3 - 5 Nm.
Changing the bulb
Unlock the light dome by pressing the locking button. Turn
the light dome anti-clockwise and remove it. Replace the
light bulb. Replace the light dome on and screw it on.
Important: Do not touch or dirty the inside surface of the
reflector. Do not touch the bulb with your bare fingers.
Technical Data
Motor spare-part group 9MN 745 023-001
Dome 9EL 863 100-001
9EL 863 100-041
Drive belt spare-part group 9XR 855 975-001
Bulb 12 V 8GH 002 089-131
Bulb 24 V 8GH 002 089-251
15
.
. .