Using the Luxmeter and positioning aid
6.2
Positioning aid
Switching on the laser
Laser voltage supply: Customary trade monoblock 9V battery (not supplied).
1. Turn the scaled wheel
anticlockwise as far as it will
go and hold it there.
2. Press left button
The laser will be switched on
for approx. 15 seconds.
3. Align the beamsetter box in such
a way that the red laser dot visible
on the cover lens is projected
onto the middle of the headlamp
or in the case of transparent cover
lenses directly onto the bulb.
The laser dot is not clearly visible
on some cover lenses. In such
cases, the laser dot can be made
visible, e.g. by holding one hand
in front of it.
The height of the laser dot can
also be determined by rotating
the beamsetter box next to the
headlamp.
4. If the vehicle has multiple
headlamp systems, direct the
laser dot onto the system being
checked.
16