15
Please note:
These default settings may, of course, be modified in the DSP main menu. They are only used to
protect the connected loudspeaker and are not recommendations for correct settings!
Allocating inputs to outputs:
In the center of the input mask, you can allocate any of the input signals to each of the eight out-
puts A-H. You can also use either the right or left mouse button to make this selection:
Important information:
In order to reach the maximum level on each output, it is important that each of the output
channels always (!) equals the sum of four input signals. If you only select one input signal
per output, the maximum possible output level is reduced by about 12 dB.
General information about the input/output configuration:
•
You do not have to use all the P-DSP inputs. It is entirely possible to generate all eight output
channels from only two input channels.
•
We recommend setting all unused inputs and outputs to “Not_used”.
•
Each output channel should always equal the sum of four input signals. This means that all
fields required for the sum signal must be completed, even if they are always filled with the
same signal. If this is not the case, there will be a significant drop in output.
