- 7 -
3/ ASSEMBLY
Step 3:
Insert the Stabilizer Leg assembly bolts
into the legs and secure as shown.
Tighten these bolts firmly.
Step 4:
Align the bolt holes on the pedal frame with the bolts on the yoke of the
Crank arm. These two parts should fit together to allow the Pedal Frame
and yoke to become even and flush with each other.
While holding the frame in place, first install the top bolts partially to allow
the pedal frame to “hang” on those bolts. Now partially install the bottom
left and bottom right bolts.
Slowly tighten all the bolts until the two parts become perfectly aligned to
each other with no space between the parts. Then firmly tighten all four
bolts.
Repeat for the other Pedal Frame.
PLEASE NOTE THAT VISUAL INSPECTION IS REQUIRED TO
CONFIRM THAT THE PEDAL FRAME FLANGE AND THE CRANK YOKE
ARE ALIGNED AND FLUSH TO EACH OTHER.
Failure to confirm this may result in bolt failure.
Step 3:
Step 4:
3 bolts factory installed
Fourth bolt in
Step 4 Part Bag
A5-HLT3500.indd 7
27/02/2018 16:07
