20
Installation with “Easy Plug Cable”
To simplify installation to an OEM or aftermarket
radio the HELIX DSP.2 can also be connected us-
ing the optional Easy Plug Cable (EPC 5) which will
supply the signal processor with both power and
loudspeaker signals of the radio. No factory wires
or plugs need to be cut by using this connection
PHWKRG 7KH (DV\ 3OXJ &DEOH XVHV WKH KLJKOHYHO
inputs A - D.
Connection to an OEM radio is detailed below:
1.
2QFHWKHUDGLRKDVEHHQUHPRYHGE\XVLQJWKH
right tools disconnect the OEM harness from
WKHUDGLR&RQQHFWWKHYHKLFOHFDEOHMDFNFRQ
-
nectors of the Easy Plug Cable. You may need
D VSHFLDO ,62DGDSWRU GHSHQGLQJ RQ YHKLFOH
W\SH,QRUGHUWRYHULI\SOHDVHFKHFNWKHDGDSWRU
database on the Audiotec Fischer homepage
ZZZDXGLRWHF¿VFKHUFRP
.
2.
Connect the cable plugs to the car radio.
3.
&RQQHFW WKH KLJKOHYHO SOXJ SROH FRQQHFWRU
and the power supply plug (4-pole connector) of
the Easy Plug Cable to the appropriate HELIX
DSP.2 inputs (
Highlevel Input
A to D resp.
Pow-
er Input
).
4.
Please note when connecting the power sup-
SO\WKHSHUPDQHQWDQGVZLWFKHG9ROWVZLUHV
PD\ EH UHYHUVHG GHSHQGLQJ RQ YHKLFOH W\SH
The HELIX DSP.2 should not be plugged into
WKHSRZHUVXSSO\YLDWKHLJQLWLRQFDEOHDVWKLV
may cause interferences. Before connecting
WKH(DV\3OXJ&DE(/,;'63YHUL
-
¿FDWLRQRIWKHSHUPDQHQW9ROWVZLUHPXVWEH
made between the blue and red wires coming
from the ISO connectors of the harness with
D YROWPHWHU 7KH SHUPDQHQW 9ROWV ZLUH ZLOO
VKRZ YROWDJH HYHQ ZLWK WKH YHKLFOH LJQLWLRQ
WXUQHG RII 2QFH WKH FRUUHFW ZLUH LV LGHQWL¿HG
connect the red wire with jack to the corre-
sponding blue or red wire with plug. The pos-
LWLYHFDEOHRIWKHKDUQHVVXVXDOO\KDVDIXVHRI
PD[$
Attention:
7KHH[IDFWRU\FRQGLWLRQLVWKDWWKH
UHGZLUHVDUHFRQQHFWHG,I\RX¶UHXQFHUWDLQRI
assignment ask your dealer.
Note - Cars equipped with MOST bus:
In cars equipped with MOST bus structure it is
PDQGDWRU\WRXQSOXJWKH¿EHURSWLFFDEOHIURPWKH
original radio connector and insert it into the ISO
adaptor which has a dedicated recess for this.
