background image

Q U I C K - S T A R T   G U I D E

SAVE THESE INSTRUCTIONS

UB0904-001 Rev. 0

Assembly

 

Connect the control box to the Helios Light 
panel using the connection cable.

 

Centrally position your Helios on a clean, level  
work surface to ensure optimal illumination – 
we recommend sweeping your work area  
before assembly.

 

Position Helios control box at an ergonomic 
height (e.g., on the lifting platform) 

– 

it can be 

attached to any metal surface.

 

Lay the connection cables where they do not 
pose a tripping hazard.

 

Connect the control box to an electrical outlet 
using power cord.

NOTE: 

UberLux is not liable for any injuries 

arising or resulting from improper securing of 
cables. We recommend using a cable bridge. Pay 
attention to sufficient load-bearing capacity when 
selecting the cable bridge.

Model

Helios

Color temperature 

5700K

Lumen output (rated)

8,225 lm 

Type of protection

IP 66/67 (Panel only)
Suitable for damp locations per 
UL 153

Power consumption

60 W (max. per Helios)

Supply voltage input 

Power adapter integrated 
in control box

120-277 VAC / 50-60Hz 
Output: 24 V, 2.5 A (per Helios)

Operating 
temperature range

5° C to 40° C
41° F to 104° F

Dimensions (L x W x H)

690 x 386 x 18.3 mm (Helios)
26.7" x 16.2" x 0.9"
190 x 120 x 60 mm (control box)
8.4" x 5.2" x 3.3"

Weight

6.35Kg (Helios)
14.0 lb
0.90Kg (control box)
2.0 lb

Technical data

For additional resources and information, visit 
www.helios-light.com. Contact us directly at 
[email protected] or 317.593.5939 from 
8:00am to 5:00pm EST Monday through Friday.

Cleaning

Helios is resistant to most of the liquids found in 
normal vehicle service workshops. However, you 
should clean after each use, using solvent-free 
cleaning agents. 

NOTE:

 Acetone-based solvents will cloud the 

polycarbonate lens and must be removed 
immediately from panel to limit damage. 
Acetone-based solvent damage is not covered 
under warranty. 

Warranty

Warranty information for UberLux branded 
product only

IMPORTANT: 

BY USING YOUR UBERLUX 

PRODUCT YOU ARE AGREEING TO BE BOUND 
BY THE TERMS OF THE UBERLUX ONE (1) YEAR 
LIMITED WARRANTY (“WARRANTY”) AS PROVIDED 
AT WWW.HELIOS-LIGHT.COM/WARRANTY. DO 
NOT USE YOUR PRODUCT UNTIL YOU HAVE 
READ THE TERMS OF THE WARRANTY, AND 
YOU ACCEPT ITS TERMS AND CONDITIONS, 
INCLUDING THE LIMITATIONS, EXCLUSIONS, 
AND DISCLAIMERS THEREIN. IF YOU DO NOT 
AGREE TO THE TERMS OF THE WARRANTY, DO 
NOT USE THE PRODUCT AND RETURN IT TO 
PLACE OF PURCHASE WITHIN THE RETURN 
PERIOD STATED IN UBERLUX’S RETURN POLICY 
(FOUND AT www.helios-light.com/return-policy).

Detailed view of control box:

Your control box can either control one or 
two Helios panels 

(per the illustration below) 

depending upon which model you purchased. 

Controls one panel

Controls two panels

2

1

6

4

Port detail

5

1.  Connection cable

2.  Control box 

(single panel)

3.  Control box 

(dual panel)

4.  Power cord

5.  Capacitive touch button(s)

6.  Cable port(s)

7.  Four magnetic feet  

(rear side/one per corner)

3

7

Reviews: