7
Unit with inner panel –
KWL EC 45-160
Installation and Operating Instructions
3. Disconnect the connector plug (part
ò
from
ù
) (see Fig. 9).
4. Wire the connection cable (external diameter max. 6 mm) according to the wiring diagram.
5. Connect the connection plug and plug into the opening on the unit
(see Fig. 10)!
Pressing the fan protection grille will damage the unit!
Insert the unit on the fan casing into the wall mounting sleeve.
6. Insert the unit into the wall mounting sleeve until contact is made with the facade panel (see Fig. 11).
INSTALLATION STEP 3:
– Inner panel
The inner panel is completely open upon delivery and the outlet opening is at the
top
(see Fig. 12).
Pressing the inner panel will damage the connection cable!
Carefully insert the inner panel into the wall mounting sleeve and do not pinch the connection cable.
1. Insert the inner panel (open) into the wall mounting sleeve (see Fig. 12).
Fig .9
Connection Unit
Connection plug
Connection cable on-site
ò
ù
ATTENTION
Fig .10
Connection cable not shown!
Opening
Connection plug
Fig .11
ATTENTION
Fig .12
Inner pabel
Outlet opening top
EN
