Helios GigaBox GBD EC 400 T120, Installation And Operating Instructions Manual

Page: 28 / 40

8
GigaBox GB.. EC T120
Installation and Operating Instructions
EN
6.0 Information – Fault causes
Motor is not running:
– lack of power supply
– Motor was deactivated by internal motor protection device
– defective motor
Abnormal noises can be caused by
– incorrect direction of rotation
– worn out ball bearings
– lack of vibration decoupling to other buildings and ducting systems.
Vibrations and oscillation can be caused by:
– unbalanced or dirty impellers
– lack of vibration decoupling to other buildings and ducting systems
Extreme reductions in performance
can occur
– in case of incorrect direction of rotation
– if resistance to air stream through ducting and accessories (grilles, shutters, filters etc.) is higher than planned.
– incorrect voltage
– bearing damage
– contamination
7.0 Technical data for control inputs
CHAPTER 6
FAULT CAUSES
CHAPTER 7
WIRING DIAGRAMS
Art.-Nr. Type
Potentiometer feed in V / mA Control input / set-value input in V / A (load) Number of fans with
PU/A
friom the 10 V fan supply (without PU/A LED) Number of fans with
PU/A
friom the 10 V fan supply (with PU/A LED) Number of fans with
SU/A-3
10
from
the 10 V fan supply
Number of fans with
EUR
EC
from the
10 V EUR EC
supply Number of fans with
ETR/
ETD
from the 10 V fan
supply Number of fans with
ETR/
EDR
from the 24 V fan
supply Number of fans with
ETR/
EDR
with external power
supply (NG24) Relay Output Wiring diagram SS-
6372 GBW EC 355 T120 10 V / 20 mA 0-10 V / 0.167 mA
(Ri = 60 kOhm)
100 76 100 59 – 59 via EC
motor
2 changer
(error/motor runs)
24 V AC/DC 1 A
1223,1
6453 GBW EC 400 T120 10 V / 20 mA 0-10 V / 0.167 mA
(Ri = 60 kOhm)
100 76 100 59 – 59 via EC
motor
2 changer
(error/motor runs)
24 V AC/DC 1 A
1223,1
6475 GBW EC 450 T120 10 V / 20 mA 0-10 V / 0.167 mA
(Ri = 60 kOhm)
100 76 100 59 – 59 via EC
motor
2 changer
(error/motor runs)
24 V AC/DC 1 A
1223,1
6452 GBD EC 355 T120 10 V / 20 mA 0-10 V / 0.167 mA
(Ri = 60 kOhm)
100 76 100 59 – 59 via EC
motor
2 changer
(error/motor runs)
24 V AC/DC 1 A
1214,1
6445 GBD EC 400 T120 10 V / 20 mA 0-10 V / 0.167 mA
(Ri = 60 kOhm)
100 76 100 59 – 59 via EC
motor
2 changer
(error/motor runs)
24 V AC/DC 1 A
1214,1
6476 GBD EC 450 T120 10 V / 20 mA 0-10 V / 0.167 mA
(Ri = 60 kOhm)
100 76 100 59 – 59 via EC
motor
2 changer
(error/motor runs)
24 V AC/DC 1 A
1214,1
6477 GBD EC 500 T120 10 V / 20 mA 0-10 V / 0.167 mA
(Ri = 60 kOhm)
100 76 100 59 – 59 via EC
motor
2 changer
(error/motor runs)
24 V AC/DC 1 A
1214,1
6481 GBD EC 560 T120 10 V / 20 mA 0-10 V / 0.167 mA
(Ri = 60 kOhm)
100
76 100 59 – 59 via EC
motor
2 changer
(error/motor runs)
24 V AC/DC 1 A
1214,1
6485 GBD EC 630 T120 10 V / 20 mA 0-10 V / 0.167 mA
(Ri = 60 kOhm)
100 76 100 59 – 59 via EC
motor
2 changer
(error/motor runs)
24 V AC/DC 1 A
1214,1