7.2 Start-up
Procedure
1. You must mount and connect the device in accordance with the operating instruc-
tions.
2. Double check that all connections are correct.
3. The supply voltage must match the information on the rating plate.
4. Set the mode, unit and measuring range and adjust the sensor in the
BASE
SETUP
.
5. Set the parameters for control operation for the mode
2.01
under
SETTING
.
Information
When saving the operating Mode, the factory settings are stored. Therefore all the
settings you have made before, are lost.
7.3 Menu structure
27.5
°
C
Actual Value
Display after turning on the voltage supply.
Switch over between actual value display and
“
INFO
”
with
the key shortcut for Escape (Esc =
▼
+
▲
).
INFO
Selection of the menu group (e.g. BASE SETUP) to the right through the
▼
-key, to the
left through the
▲
-key.
Youcangotothemenuitemsinthe
menu
groups (e.g. mode) by using the P key. Use the
arrow keys to move up and down within the menu group.
To make adjustments, press the
P
key after selecting the menu item. If the previously set
value starts to
fl
ash, it can be adjusted with the
▼
+
▲
keys and then saved with the
P
key. To exit the menu without making any changes, use the
“
Esc
”
short-key, i.e., the
originally set values remain.
Installation and Operating Speci
fi
cation
ETR
Programming
L-BAL-E293-GB 1841 Index 001
Part.-No.
10/19