Operation
Front Panel Controls and LED Indicators
Shown below are the controls and indicator lights on the front of
INVERMAX.
Figure 1 Front Panel
Power On/Off
power on/off button is shown as above. Once INVERMAX has been
properly installed and batteries are connected, press this button and
INVERMAX will turn on automatically, and works in mains mode or inverter
mode according to input AC source’s status. When press this button again,
INVERMAX will turn off automatically.
Mains Mode LED
The green LED will blink or light steadily when power mains is normal.
Note: The green LED blinks every 2 seconds to indicate that battery
capacity is not full enough and battery is being charged by high rate.
Inverter Mode LED
The Yellow LED will light when power mains is abnormal. And unit will
work in inverter mode.
Fault LED
Summary of Contents for INVERMAX 1000
Page 1: ...USER MANUAL ...
