6. Serial Cable Connection
To allow for unattended system shutdown for your operating system,
connect the RS-232 serial cable as per diagram below.
7. Turn On/Off
To turn on the UPS, press power switch lightly. To turn off the UPS,
please press power switch again.
8. DC Start Function
DC Start Function enables UPS to be started up when AC utility power
is not available and battery is fully charged. Just simply press the
power switch to turn on the UPS.
9. Green Power Function
Braver UPS is equipped with Green Power Function. For saving
power and protecting battery, the method of deep discharging
protection is adopted on inverter mode.
