( 3 ) Trim D: This will correct unintentional lateral displacement of VR-Racer by pressing in the
opposite direction.
Note: it is advised to make the final trim adjustment when the craft is airborne.
The VR-Racer is equipped with an auto-trim system whereby it’s initial settings can be restored,
allowing the aircraft to fly in an accurate and level manner.
When must we use this function?
- If the aircraft has taken an impact and as a result it’s Gyroscope / Electronic stabilizer is unstable.
- If you have transported the aircraft from one place to another.
- If your VR-Racer does not maintain it’s fixed position when hovering.
Automatic trim: To return the transmitter to it’s original default setting press and hold down the
“automatic trim” button, located in the upper left section of the transmitter while turning the on / off
switch to the ON position as indiacted below. This function can be carried out regardless of whether
the VR-Racer and transmitter have previously been synched / linked.
When both joysticks are moved to the reset position the lights on the VR-Racer will start to
flash rapidly, which means that the reset process is being carried out, once 10 seconds has
elasped, return both joysticks to their initial position, at that time the lights on the VR-Racer
will stop flashing, which means that the reset has completed successfully.
Summary of Contents for H817
Page 1: ...USER MANUAL ...
