Heliceo Fox6, User Manual

Page: 55 / 73

55 V1.1
Save and load a mission plan
Before saving the survey plan, verify that the mission plan is compliant with the
Fox
6
working parameters.
Mission plan may be saved in a file, from the survey tool window with CTRL-S. At the
opposite, a mission plan may be reloaded from a saved file with CTRL-O.
In the same way, mission Way Points instructions may be saved in a file by clicking on
“
« S
ave WP File
»
and Way Points instructions may be reloaded from a file by clicking on
“Load WP File”, as shown below.
Load the navigation plan to the drone (via telemetry or USB cable). Click on the
«
Ecrire
PNs
»
or
«
Write PNS
» button
.
A popup message “done” must appear, without error mention.
Place the drone close to the Ground Control Station (GCS) to perform this step.
Do not accept the mission if one of the parameters exceeds the working limits of
the drone