3
BEFORE ASSEMBLING
1:Check for all the parts in the
list come with the manual.
2:Some basic tools are needed
to help the assembly.
600scale fuselge,suitable for T-REX600 Nitro Helicopter series
TOOL
1:Cutter knife. 2:Hexagon screw
driver
3:Phillips screw driver. 4:File.
5:Diagonal cutting pliers.6:Silicone
7:CA glue. 8:AB glue 9:Fine
sandpaper.
10:Scissors.
Fly only safe areas,away from other people.Do not operate R/C aircraft within the vicinity of
homes or crowds of people.R/C aircraft are prone to accidents,failures,and crashes due to a
variet of reasone including,lack of maintenance,pilot error,and radio interference.pilots are
responsible for their actions and damage or injury occurring during the operation or as of a
result of R/C aircraft models.
1:Landing Gear x4 2:Skid Pipes x2 3:Set screw M3x4 x4
4:Self-Tapping Screw T3x10mm x4 5:Transmitter support frame x2 6:Transmitter
7:
Combination self-Tapping Screw 3x16mm x2 8:Wood pieces
9:washers ￠ 3.2x ￠ 8x0.8mmx4.
10:Hex Cap Screw 3x20mm x4 11:Sponge x1 12:Combination self-Tapping Screw 3x16mm x4
13:Taillight cover 14:Headlight cover 15:Doll1 16:Doll2 17:Seat
18:Horizontal Stabilizer 19:Vertical Stabilizer x1 20:Small Vertical Stabilizer x2
21:Combination self-Tapping Screw 2x5mm x2 22:Washer ￠ 3.2x7x0.5mmx4
23:Hex Cap Screw 3x35mm x2 24:Antenna x1
17
15
16
