HELI CPD10, Operation & Service Manual

Page: 88 / 131

85
opening cover.
b) Do not pull the or twist charging cable.
c) The charging equipment should not bear shock.
d) Do not store or use the charging equipment when the temperature is higher than
50
℃
.
e) It is prohibited to disconnect the changer when there is current output or
electric arc may be produced which will cause person injury or property loss.
f) Keep the charging equipment away from the heater or other heat sources.
4.6 Emergency button
Emergency button is used to cut load current and overload current and it is acts as
safety button. The emergency button on the truck is used under the following application:
(1) It acts as safety switch. Press the button in emergency to ensure truck safety. it
is prohibited to press the button frequently if it is not emergency or parts service lift will
be badly affected.
(2) Press the emergency button in the following cases to prevent battery feed:
a) When the truck will not be used for more than 72h, press the button when the
battery quantity meeting storing requirements (refer to lithium battery operation and
service manual for detail).
b) When transporting press the button when the battery quantity meeting
transporting requirements (refer to lithium battery operation and service manual for
detail).
c) When maintaining the truck, press the button.
Note: if the button is not pressed when not use for a long time, battery feed may
be caused and truck may be badly affected.
4.7 Daily Maintenance