HELI Bell 407, Instruction Manual

Page: 4 / 34

HELI - SCALE
Copyright ® 2012 - Reproductions interdites
www.heli-scale.fr
BELL407
Note:
Ce fuselage a été conçu pour une mécanique de T-rex 700. Mais avec quelques
ajustements, il est possible de monter la plupart des mécaniques classe 90 / 700.
Certaines pièces montrées dans cette notice ne sont pas incluses dans le kit comme
les aimants par exemple.
Toujours faire un pré-assemblage/ ajustage des pièces avant le collage définitif.
Please note:
- These mounting instructions are examples only, as the assembly could take place.
This is based on a TREX 700 mechanics. With slight adjustments, most 90er/700er
mechanics can be installed.
- Not all parts that are shown in this guide are included in the kit. E.g. can magnets
via air freight only be transported with an expensive certificate. Please get magnets
at your local dealer store.
- Always wait for the bonding of parts until you are sure that the parts fit. Do it first
without sticking to the fuselage, to "test it out".
- For the correctness of the instructions, we assume no liability.
1. Assemblage des pièces du couple / Assembly of the wooden parts for
the frame
Montez les pièces comme indiqué sur la photo ci dessous. Ajustez, puis collez le
tout à la colle époxy
Put the pieces together as shown in the pictures and glue them with epoxy. (Only
stick when you are sure that everything fits!)