Heli-Professional REVOLUTION 500E, Manual

Page: 9 / 41

www.heli-professional.com 9
Transmitter Programming Throttle/Pitchcurve
Heli-Professional suggests you to program 3 Throttle / Pitchcurves in your transmitter. F
·
Flight Mode 1:
This flight mode is used for takeoff, hoovering and for landing. Adjust the throttle and pitchcurve for flightmode 1
this:
Flight Mode 1 / Hoover
Point Pitchcurve Pitchangle Throttle
1 35% -4° 0%
2 42.5% -2° 25%
3 50% 0° 65%
4 75% 6° 85%
5 100% 12° 100%
·
Flight Mode 2:
This flight mode is used for basic flights and soft aerobatics. Adjust the throttle and pitchcurve for flightmode 2
like this:
Flight Mode 2 / Basic Flight
Point Pitchcurve Pitchangle Throttle
1 0% -12° 90%
2 25% -6° 85%
3 50% 0° 80%
4 75% 6° 85%
5 100% 12° 90%
·
Flight Mode 3
This flight mode is used for aerobatics and 3D flight. Adjust the throttle and pitchcurve for flightmode 3 like this:
Flight Mode 3 / Aerobatics
Point Pitchcurve Pitchangle Throttle
1 0% -12° 100%
2 25% -6° 90%
3 50% 0° 85%
4 75% 6° 90%
5 100% 12° 100%
Note: The given values are based on transmitters with curves from 0-100%. If the ranges in your transmitter reach
from -100 to +100, -100 is equal to 0%, 0 is equal to 50% and +100 is equal to 100%.
Warning: Before the first flight you must set the throttle range in your ESC. Please refer to the ESC manual!
All other values of the FBL-3X are already programmed and need no adjustments. You can find the complete manual
of the Xelaris FBL-3X on www.heli-professional.com
– Downloads.